Description
December 13, 2024 Update: My filament supplier discontinued Dark Yellow, so the default is now red.
A 3D printed case, that fits the Eggtimer LCD receiver to locate and track your rockets. Please see the features of the case below:
- Power Switch, used for powering the unit.
- Momentary Switch, for programing and selection.
Each purchase includes the necessary hardware, such as machine screws, spacers, nuts, etc. needed to assemble the case. However, it does not come with wires or adapters which are needed to complete connections to the battery. See the list of all of the included hardware below:
- 1 – Momentary Switch
- 1 – Rocker Switch
- 4 – 3D Printed Spacers
- 2 – M3 X 12 Flat Heat Screw
- 5 – M3 X 25 Flat Head Screw
- 10 – M3 Square Nuts
- 6 – #4 – 3/16″ Self Tapping Screws
- 2 – Quick Disconnect Terminals
- 1 – Z-Line Lanyard Attachment
This case does require some experience with soldering and an understanding of the appropriate wiring of the unit sold by Eggtimer Rocketry.
Note: The color of the case as seen in the photos may differ from what you receive.
